QF131 Pleated Filters
![QF131 Pleated Membrane Filter](http://www.shulerfiltration.com/wp-content/uploads/2019/10/QF131-Pleated-Membrane-Filter.jpg)
Applications
- Fine Chemical
- Microelectronics & Semi-conductor
Description
Shuler’s QF131 Series filters are designed for TFT-LCD wet process with advantages of superior high flow rate, long service life and low pressure drop.
Furthermore, our QF131 filter cartridges provide cost-saving solutions for fewer filter cartridges outs and easier replacements.
Available in various filter media and micron ratings, QF131 Series filters play efficiently to meet different needs in critical applications.
Specification
Dimension | OD: φ131mm |
---|---|
Length: 10” | |
Material of Construction | Media: PP, PES, Hydrophobic PTFE, Hydrophilic PTFE |
End Cap: Polypropylene | |
Gasket: EPDM, Viton, Teflon encapsulated viton | |
Core: Polypropylene | |
Performance | Max.Operating Temperature: 80℃ |
Max.Operating DP: 4.0bar@21℃ | |
2.4bar@80℃ |
Ordering Information
Code | Filter Media | Micron Rating | Length | End Cap Type | Gaskets | |||
---|---|---|---|---|---|---|---|---|
PP | PES | Hydrophobic PTFE | Hydrophilic PTFE | |||||
QF131 | P=PP | 0.1=0.1μm | 0.05=0.05μm | 0.01=0.01μm | 0.05=0.05μm | 10=10” | S=334 Single O-ring | E = EPDM |
S=PES | 0.22=0.22μm | 0.1=0.1μm | 0.02=0.02μm | 0.1=0.1μm | V = Viton | |||
F=Hydrophobic PTFE |
0.45=0.45μm | 0.22=0.22μm | 0.05=0.05μm | 0.22=0.22μm | W=Teflon encapsulated viton |
|||
H=Hydrophilic PTFE |
1 = 1μm | 0.45=0.45μm | 0.1=0.1μm | 0.45=0.45μm | ||||
3 = 3μm | 0.65 = 0.65μm | 0.22=0.22μm | 1 = 1μm | |||||
5 = 5μm | 1.2 = 1.2μm | 0.45=0.45μm | ||||||
10 = 10μm | 1 = 1μm | |||||||
20 = 20μm | ||||||||
50 = 50μm |